Hi All
Lets start with the basics of setting up Raspberry Pi.
Requirements:
Lets start with the basics of setting up Raspberry Pi.
Requirements:
- Raspberry Pi [https://www.amazon.com/dp/B01LWVVMUI/ref=as_li_ss_tl?psc=1&linkCode=ll1&tag=arduinopibake-20&linkId=619dd3e1a1daab389aa5a44dac22a276]
- If you have a VGA monitor, you would need a HDMI to VGA convertor [https://www.amazon.in/gp/product/B00S0C76GQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1]
- Keyboard, mouse and monitor.
Setting up SD Card for the Raspberry Pi
- Take the SD card and put it in the MicroSD -USB ADAPTER. Connect this to your laptop.
- Download Etcher software from https://www.balena.io/etcher/
- Download Raspbian from https://www.raspberrypi.org/downloads/raspbian/
- Now use Etcher to write to the flash drive
- Simple UI. Open Etcher
- Select the Raspbian zip file
- Select the drive
- Flash
Connecting and Starting Raspberry Pi
- Put the SD card in the Raspberry Pi.
- Connect the Raspberry Pi to the monitor.
- Connect the mouse and keyboard and power on the Raspberry Pi
- Once it boots, set up wifi on top right.
- Go to the Raspberry icon on top left and Go to Settings > Preferences> "Raspberry Pi Configuration" and make the changes in settings as shown in the images below.
- When you click OK, it will ask you to reboot the Pi and go ahead and reboot to Save the changes.
No comments:
Post a Comment